Not all house demolition projects involve knocking or tearing down a building completely. Enter selective demolition, also known as interior demolition, and you can protect your structure's integrity while bringing down some parts of your building.

When to Do Selective Demolition

You can go the selective demolition way on any building that is structurally sound for many reasons and purposes. For starters, if you are looking to do some interior renovations and remodels, this method is the way to go. This may be anything from adding a new floor or room to re-proportioning your spaces.

You can also turn to selective house demolition in preparing your home for an extension. The same goes for when you want to alter the layout of your building. You may also need to demolish part of your building to remove hazardous materials.

Using the Right Equipment

For a selective house demolition project to be successful and safe, your contractor will need to be selective about the equipment used for the job. You may be able to reuse and recycle some of the materials from the demolition, which is why deconstruction is the technique used in these projects.

Deconstruction requires the use of special equipment and tools. This selection of equipment will ensure that the material you wish to salvage does not get damaged during the demolition. The contractor will also need to choose equipment that will make it easy to sort through the debris, separating what you can keep for reuse, recycling, or reselling and what ends up in the landfills.

A powerful magnet, for example, will help in sorting scrap metal from the rest of the debris. Similarly, the contractor can use a concrete crusher to turn all that concrete waste into gravel that you can reuse in other projects.

Following Codes and Safety Guidelines

As with a full house demolition, there are codes that apply with regards to requirements you should meet and what you can and cannot do during your selective house demolition project. An expert contractor will help to ensure you are on the right side of the law through code review. Similarly, the project calls for implementing all the safety measures required of a demolition project. These measures include cutting off power to the area under work and installing shores to prevent building movement or collapses.

If you have a project in mind that doesn't require a full demolition, consider selective demolition. A demolition contractor will help you with your specific needs.

Share